Heterolytic cleavage of a beta-phosphatoxyalkyl radical resulting in phosphate migration or radical cation formation as a function of solvent polarity

[formula: see text] The 2-(diethylphosphatoxy)-2-(p-methoxyphenyl)-1,1-dimethylethyl radical (1) reacted to give the benzylic radical product from phosphate migration or a radical cation (or a mixture of the two) as a function of solvent. Smooth acceleration in rates of reactions of 1 in solvents of increasing polarity and consistent entropies of activation indicate that radical 1 reacts by common mechanism irrespective of the final products formed, specifically by initial heterolysis to a radical cation-phosphate anion pair.     

Kinetics of zinc and cadmium dissociation of metallothionein in the presence of chelating agents

The dissociation kinetics of metal ions from native metallothionein (Cd₅Zn₂-MT) of rat liver has been studied in the presence of external ligands including amino acids, peptide and polyamino polycarboxylic acids at 25°C. The study shows that the solution pH affects the metal dissociation process. Different ligands present different multiphasic kinetics. The possible mechanism of metal dissociation from metallothionein has been proposed.     

羟丙基醋酸纤维素的合成及其膜的反渗透性

研究了羟丙基纤维素和羟丙基醋酸纤维素的合成。制备羟丙基纤维素的较佳反应温度为40℃左右和2小时或稍长,羟丙基含量随环氧丙烷浓度的增加而增加。在制备羟丙基醋酸纤维素时,随羟丙基含量的增加,所需醋化和水解的时间减少。以甘油-正丙醇或磷酸为添加剂,丙酮为溶剂经30～60s蒸发后制得了羟丙基醋酸纤维素反渗透膜。后者在20kg/cm~2下对氯化钠脱盐率可达95～98％,水通量1.0～2.1mL/cm~2·h,其使用温度上限比醋酸纤维素反渗透膜提高10℃以上。     

Synthesis and characterization of diametrically substituted tetra-O-n-butylcalix[4]arene ligands and their chelated complexes of titanium,molybdenum, and palladium

The ligation properties of three new upper-rim-substituted calix[4]arene ligands, 5,17-bis(hydroxymethyl)-tetra-n-butoxycalix[4]arene ((HOCH2)2-nBu4Clx, 7), 5,17-bis((diphenylphosphinito)methoxy)-tetra-n-butoxycalix[4]arene ((PPh2OCH2)2-nBu4Clx, 8), and 5,17-bis((diphenylphosphino)methyl)-tetra-n-butoxycalix[4]arene ((PPh2CH2)2-nBu4Clx, 10) are reported herein. The newly prepared compounds differ from previously reported diametrically substituted calix[4]arene derivatives in that the lower-rim substituent was n-butyl. The presence of this lower-rim substituent did not reduce the inherent crystallinity of these complexes as purification of all materials occurred via simple crystallizations. The key precursor for the syntheses of 8 and 10 was 7, acquisition of which occurred in six steps starting from tetra-tert-butylcalix[4]arene, 1. Calix[4]arene derivatives include, tetra-n-butoxycalix[4]arene (nBu4Clx, 3), 5,11,17,23-tetrabromo-tetra-n-butoxycalix[4]arene (Br4-nBu4Clx, 4), 5,17-dibromo-tetra-n-butoxycalix[4]arene (Br2-nBu4Clx, 5), 5,17-bis(formyl)-tetra-n-butoxycalix[4]arene ((CHO)2-nBu4Clx, 6), and 5,17-bis(chloromethyl)-tetra-n-butoxycalix[4]arene ((ClCH2)2-nBu4Clx, 9), all of which were synthesized using modifications of existing procedures. Characterization of all compounds occurred, when possible, using 1H, 13C, and 31P NMR, elemental analyses, FAB-MS, ESI-MS, FT-IR, and X-ray crystallography. The solid-state structures of all calix[4]arene intermediates and ligands showed that the annulus adopted the pinched-cone conformation in which the average C(5)...C(17) intraannular separation was 4.5 +/- 0.4 A. Reaction of 7 with CpTiMe3 yielded the cis-chelate, CpTi(Me)[(OCH2)2-nBu4Clx] (11), quantitatively. Data obtained using ESI-MS (positive-ion mode) confirmed the monomer formulation showed above, and 1H NMR spectra provided sufficient information to deduce the nature of the Ti coordination sphere. Reaction of 8 with cis-Cl2Pd(NCPh)2 in refluxing benzene afforded cis-Cl2Pd[(PPh2OCH2)2-nBu4Clx] (12) in good yields. The monomeric identity of this compound was verified by both X-ray crystallography and positive-ion ESI-MS. The cis-bidentate calix[4]arene ligand did not undergo any noticeable contortion upon chelation of the PdCl2 fragment. Acid-promoted decomposition of 12 occurred in the presence of adventitious HCl and gaseous HCl, and the products of this decomposition were 9 and [mu2-ClPd(PPh2OH)(PPh2O)]2. In addition, chelates of 8 that contained Mo(CO)3L (L = NCMe (14a), NCEt (14b), and CO (14c)) showed that the mode of coordination was relatively insensitive to the identity of the metal. X-ray crystallography afforded views of the solid-state structures of 14b,c and, like 12, showed that the Mo(CO)3L fragment resided above the pinched-cone of the calix[4]arene. 1H NMR revealed that C-H/pi interactions existed between L (14a,b) and a phenyl ring of the coordinated phosphinite. Finally, the bis(diphenylphosphine)calix[4]arene ligand (10) readily coordinated the Mo(CO)3L species, but the reaction did not go to completion, as evidenced by 1H NMR, even after a 5 day reaction time. Data suggest that the product is similar to that observed for 12 and 14, but the incomplete reaction complicated attempts to obtain pure material and prohibited definitive assignment of the coordination array.     

Synthesis and properties of the double perovskites La2NiVO6, La2CoVO6, and La2CoTiO6

The double perovskites La₂CoVO₆, La₂CoTiO₆, and La₂NiVO₆, are described. Rietveld fitting of neutron and powder X-ray diffraction data show La₂NiVO₆ and La₂CoVO₆ to have a disordered arrangement of B-cations whereas La₂CoTiO₆ shows ordering of the B-cations (with ∼5% Co/Ti inversion). Curie-Weiss fits to the linear region of the 1/χ plots reveal Weiss temperatures of −107, −34.8, and 16.3 K for La₂CoVO₆, La₂CoTiO₆, and La₂NiVO₆, respectively, and magnetic transitions are observed. La₂CoTiO₆ prepared by our method differs from material prepared by lower-temperature routes. A simple antiferromagnetic spin model is consistent with the data for La₂CoTiO₆. These compounds are semiconductors with bandgaps of 0.41 (La₂CoVO₆), 1.02 (La₂CoTiO₆) and 0.45 eV (La₂NiVO₆).     

(C2H10N2)[BPO4F2] — Structural Relations between [BPO4F2]2— and [Si2O6]4—

(C₂H₁₀N₂)[BPO₄F₂] — Strukturbeziehungen zwischen [BPO₄F₂]^2— und [Si₂O₆]^4— Colourless crystals of (C₂H₁₀N₂)[BPO₄F₂] were prepared from mixture of ethylendiamine, H₃BO₃, BF₃ · C₂H₅NH₂, H₃PO₄ and HCl under mild hydrothermal conditions (220 °C). The crystal structure was determined by single crystal methods (triclinic, P1¯ (no. 2), a = 451.85(5) pm, b = 710.20(8) pm, c = 1210.2(2) pm, α = 86.08(1)°, β = 88.52(2)°, γ = 71.74(1)°, Z = 2) and contains infinite tetrahedral zweier‐single‐chains {[BPO₄F₂]^2—} which are isoelectronic (48e^—) with the polyanions {[Si₂O₆]^4—} of the pyroxene family.     

Tritium content as indicator of environmental character on Taiwan Island

Environmental characters have been established by tritium contents in well water, coastal seawater and reservoir water collected from various places around Taiwan island. Tritium concentrations of samples were detected by a liquid scintillation analyzer TRI-CARB-LSC 2550 TR mode, with a low level standard quench curve. After samples were concentrated by electrolysis, tritium concentration was detected in optimum conditions of LLLSA. An electrolytic enrichment technique was also developed with a eurrent density of 100 mA/cm² and 0.4–0.6% (Na₂O₂) electrolyte in concentrated samples. Data observed show a lower tritium concentration for coastal seawater than for wells in the same area. The tritium concentration ratio of well and coastal seawater on the western side of Taiwan is 4.000 and on the eastern side 5.801. Tritium content of reservoir water is related to the logarithm of effective volume capacity.     

Boomerang‐Type Substitution Reaction: Reactivity of Fullerene Epoxides and a Halofullerenol

The C_s‐symmetric fullerene chlorohydrin C₆₀(Cl)(OH)(OOtBu)₄ reacts with 4‐dimethylaminopyridine (DMAP) and 1,4‐diazabicyclo[2.2.2]octane (DABCO) to yield two isomers with the formula C₆₀(O)(OOtBu)₄ in good yields. These isomers differ with respect to the location of the epoxy functionality. The one from DMAP is C_s symmetric, whereas that from DABCO is C₁ symmetric with the epoxy group on the central pentagon. Two different mechanisms are proposed to explain the chemoselectivity of these reactions. The reaction with DMAP involves single‐electron transfer as the key step; DMAP acts as the electron donor. A combination of an oxygen‐atom shift and S_N2′′ processes (boomerang substitution) are responsible for the formation of isomer with DACBO. Various related reactions support the proposed mechanisms. The structures of new fullerene derivatives were determined by spectroscopy, single‐crystal X‐ray analysis, and chemical correlation experiments.     

Octyl-type monolithic columns of 530 microm i.d. for capillary liquid chromatography

A novel monolithic capillary column (530 microm i.d.) was prepared for capillary liquid chromatography (CLC) by in situ copolymerization of octyl methacrylate (MAOE) and ethylene dimethacrylate (EDMA) in the presence of a porogen solvent containing 1-propanol, 1,4-butanediol, and water with azobisisobutyronitrile as the initiator. The influences of the contents of the porogen solvent, EDMA and the various concentration ratios of 1-propanol to 1,4-butanediol in the polymerization mixture on the morphology, porosity, globule size, stability and column efficiency were investigated. The morphology and pore size distribution of monolithic capillary columns were characterized by SEM and mercury intrusion porosimetry, respectively. Chromatographic evaluations of the columns were performed under CLC mode. The results showed that good permeability and stability can be obtained under optimal experimental conditions. The separation results of some acid, neutral and basic analytes demonstrated the hydrophobicity and low affinity to basic analytes of the new column. Three metal ions, i.e. Mg(II), Zn(II) and Cd(II) were also separated under ion-pair mode on the new monolithic capillary column and the results were acceptable.     

Ring-opening reaction of methylenecyclopropanes with LiCl, LiBr or NaI in acetic acid

The methylenecyclopropanes 1 react with LiCl, LiBr or NaI at 80 °C to give the corresponding gem-disubstituted homoallylic halides 2 in good to excellent yields in acetic acid. In some cases, the ring-opening reaction can be completed within 5 min to give the corresponding gem-disubstituted homoallylic halides in high yields.